Combined Effect of Extraction and Purification Conditions on Yield, Composition and Functional and Structural Properties of Lupin Proteins.

Lupin meal presents great potential as an alternative plant-based source of proteins for human nutrition. In the present work, different conditions of extraction and purification were evaluated for production of lupin protein isolates. The results showed that the protein extraction yield was comparable at acidic and conventionally used alkaline extraction pH (37% vs. 40-45%, respectively). Proteins extracted were principally composed of globulins. The ionic strength negatively impacted the protein extractability at pH 2, whereas no significant differences were observed between extractions at 20 to 50 °C. The selected extraction conditions (pH 2 and 7) combined with purification by isoelectric precipitation or ultrafiltration process generated the isolate-grade products. Interestingly, further characterization revealed a partial denaturation of proteins extracted at pH 2 resulting in loss of protein solubility at pH 6 and 7 (10-50%), modifications in secondary structure, lower thermal stability, and formation of protein aggregates. However, foaming and emulsifying properties were generally similar for almost all lupin isolates. Further investigation might be of interest with regard to the extraction behaviours and structural and functional properties of specific lupin protein fractions.

Multi-objective optimization of solid/liquid extraction of total sunflower proteins from cold press meal.

The impact of pH (6-9) and NaCl concentration (0-0.5 mol.L-1) on sunflower protein extraction was studied through design of experiments. The considered criteria were protein extraction yield (total proteins, helianthinin and albumins), chlorogenic acids covalently bound to proteins, and free chlorogenic acid concentration in the aqueous extract. Statistical analysis showed that the obtained by design of experiments the polynomial models of each extraction criteria were reliable for predicting the responses. They were employed in an original multi-objective optimization methodology. The optimal conditions revealed to be pH 7.3/0.3 mol.L-1 NaCl yielded 46.83% and 59.16% of total protein and albumin extraction yield, 1.730 and 1.998 mg.g-1 of chlorogenic acids covalently bound to helianthinin and albumins in aqueous extract, respectively. The sunflower protein isolate obtained after extraction in this condition had good solubility (40-80% at pH 5-8), functional properties (foaming and emulsifying) and a satisfying color.

A new size-exclusion chromatography method for fast rapeseed albumin and globulin quantification.

The method described in the article aims at the quantification of both main storage proteins, globulins and albumins, in aqueous extract from rapeseed, as an alternative to the current reference methods, Kjeldahl and SDS-PAGE electrophoresis. The new method lies on the analytical separation of extracted compounds by Size-Exclusion High Performance Liquid Chromatography (SE-HPLC) (Biosep-SEC-s2000, 5 µm). The elution of rapeseed extracts with water/acetonitrile/trifluoroacetic acid (45/55/0.1% v/v) during 30 min yields two distinct peaks for the main proteins of rapeseed. Based on the protein extinction coefficients, a calibrationless methodology was developed for their quantification on the basis of the UV signal. The SE-HPLC method was successfully compared to references: Kjeldahl and SDS-PAGE densitometry for the determination of the proportion of each protein. Then, it was successfully applied on two other oleoproteagineous plants, linseed and sunflower.

A new SE-HPLC method for simultaneous quantification of proteins and main phenolic compounds from sunflower meal aqueous extracts.

The aim of this research was to develop a method for simultaneous quantification of proteins and main polyphenolic compounds extracted from oleaginous meal by aqueous media. Size exclusion chromatography with a Biosep column (exclusion range from 1 to 300 kDa) and acetonitrile/water/formic acid (10:89.9:0.1 v/v) eluent at 0.6 mL min-1 yielded the most efficient separation of sunflower proteins and chlorogenic acid monoisomers (3-caffeoylquinic acid, 5-caffeoylquinic acid, and 4-caffeoylquinic acid). After a study of the stability of the extract components, the incorporation of a stabilization buffer (0.5 mol L-1 tris(hydroxymethyl)aminomethane-hydrochloric acid/1.0 mol L-1 sodium chloride at pH 7) was proposed to avoid polyphenol-protein interactions and/or isomeric transformation. The use of 214 nm as the wavelength for protein quantification was also included to minimize the effect of interference from polyphenol-protein interactions on the quantification. Under the used experimental conditions, the protein and chlorogenic acid monoisomer signals remained stable during 300 min at 20 °C (95-125% of the starting value). The developed method was validated and parameters such as specificity, sensitivity, precision, and accuracy were determined. The results from size exclusion chromatography correlated well with the results of protein determination by the reference Kjeldahl method. The proposed method was successfully applied for rapeseed extract analysis making simultaneous quantification of proteins and major rapeseed polyphenols (sinapine and sinapic acid) possible. Graphical abstract.

RNA-binding proteins are a major target of silica nanoparticles in cell extracts.

Upon contact with biological fluids, nanoparticles (NPs) are readily coated by cellular compounds, particularly proteins, which are determining factors for the localization and toxicity of NPs in the organism. Here, we improved a methodological approach to identify proteins that adsorb on silica NPs with high affinity. Using large-scale proteomics and mixtures of soluble proteins prepared either from yeast cells or from alveolar human cells, we observed that proteins with large unstructured region(s) are more prone to bind on silica NPs. These disordered regions provide flexibility to proteins, a property that promotes their adsorption. The statistical analyses also pointed to a marked overrepresentation of RNA-binding proteins (RBPs) and of translation initiation factors among the adsorbed proteins. We propose that silica surfaces, which are mainly composed of Si-O- and Si-OH groups, mimic ribose-phosphate molecules (rich in -O- and -OH) and trap the proteins able to interact with ribose-phosphate containing molecules. Finally, using an in vitro assay, we showed that the sequestration of translation initiation factors by silica NPs results in an inhibition of the in vitro translational activity. This result demonstrates that characterizing the protein corona of various NPs would be a relevant approach to predict their potential toxicological effects.

The nano-bio interface mapped by oxidative footprinting of the adsorption sites of myoglobin.

Oxidative footprinting has been used to study the structure of macromolecular assemblies such as protein-protein and protein-ligand complexes. We propose a novel development of this technique to probe the protein corona that forms at the surface of nanoparticles in any biological medium. Indeed, very few techniques allow studying this interface at the molecular and residue level. Based on hydroxyl radical-mediated oxidation of proteins and analysis by nanoscale liquid chromatography coupled to tandem mass spectrometry (nanoLC-MS/MS), two sites of adsorption of myoglobin on silica nanoparticles are identified. This method gives new insights in the understanding of protein adsorption on nanomaterials.

Structural determinants for protein adsorption/non-adsorption to silica surface.

The understanding of the mechanisms involved in the interaction of proteins with inorganic surfaces is of major interest in both fundamental research and applications such as nanotechnology. However, despite intense research, the mechanisms and the structural determinants of protein/surface interactions are still unclear. We developed a strategy consisting in identifying, in a mixture of hundreds of soluble proteins, those proteins that are adsorbed on the surface and those that are not. If the two protein subsets are large enough, their statistical comparative analysis must reveal the physicochemical determinants relevant for adsorption versus non-adsorption. This methodology was tested with silica nanoparticles. We found that the adsorbed proteins contain a higher number of charged amino acids, particularly arginine, which is consistent with involvement of this basic amino acid in electrostatic interactions with silica. The analysis also identified a marked bias toward low aromatic amino acid content (phenylalanine, tryptophan, tyrosine and histidine) in adsorbed proteins. Structural analyses and molecular dynamics simulations of proteins from the two groups indicate that non-adsorbed proteins have twice as many π-π interactions and higher structural rigidity. The data are consistent with the notion that adsorption is correlated with the flexibility of the protein and with its ability to spread on the surface. Our findings led us to propose a refined model of protein adsorption.

Folding of the prion peptide GGGTHSQW around the copper(II) ion: identifying the oxygen donor ligand at neutral pH and probing the proximity of the tryptophan residue to the copper ion.

The GGGTHSQW sequence in the amyloidogenic part of the prion protein is a potential binding site for Cu(II). We have previously studied the binding of copper to the shorter GGGTH peptide and showed that it is highly pH dependent (Hureau et al. in J. Biol. Inorg. Chem. 11:735-744, 2006). Two predominant complexes could be characterized at pH 6.7 and 9.0 with equatorial binding modes of 3N1O and 4N for the metal ion, respectively. In this work, we have further investigated the coordination of Cu(II) to the GGGTH peptide as well as the longer GGGTHSQW peptide in order to identify the oxygen donor ligand at neutral pH and to study the proximity and redox activity of the tryptophan residue of the latter. The results for both peptides show that, at pH 6.7, Cu(II) is coordinated by a carbonyl peptide backbone. At higher pH values, the carbonyl ligand dissociates and the coordination changes to a 4N binding mode, inducing a structural rearrangement that brings the GGGTHSQW peptide's tryptophan residue into the vicinity of the copper ion, thus affecting their respective redox properties.

Assessing the role of the active-site cysteine ligand in the superoxide reductase from Desulfoarculus baarsii.

Superoxide reductase is a novel class of non-heme iron proteins that catalyzes the one-electron reduction of O(2)(.) to H(2)O(2), providing an antioxidant defense in some bacteria. Its active site consists of an unusual non-heme Fe(2+) center in a [His(4) Cys(1)] square pyramidal pentacoordination. In this class of enzyme, the cysteine axial ligand has been hypothesized to be an essential feature in the reactivity of the enzyme. Previous Fourier transform infrared spectroscopy studies on the enzyme from Desulfoarculus baarsii revealed that a protonated carboxylate group, proposed to be the side chain of Glu(114), is in interaction with the cysteine ligand. In this work, using pulse radiolysis, Fourier transform infrared, and resonance Raman spectroscopies, we have investigated to what extent the presence of this Glu(114) carboxylic lateral chain affects the strength of the S-Fe bond and the reaction of the iron active site with superoxide. The E114A mutant shows significantly modified pulse radiolysis kinetics for the protonation process of the first reaction intermediate. Resonance Raman spectroscopy demonstrates that the E114A mutation results in both a strengthening of the S-Fe bond and an increase in the extent of freeze-trapping of a Fe-peroxo species after treatment with H(2)O(2) by a specific strengthening of the Fe-O bond. A fine tuning of the strength of the S-Fe bond by the presence of Glu(114) appears to be an essential factor for both the strength of the Fe-O bond and the pK(a) value of the Fe(3+)-peroxo intermediate species to form the reaction product H(2)O(2).

Role of the PEWY glutamate in hydroquinone-quinone oxidation-reduction catalysis in the Qo Site of cytochrome bc1.

The glutamic acid residue of the conserved PEWY motif of the Q(o) site of cytochrome bc(1) is widely discussed as central to reversible Q(o) site catalysis of two-electron, two-proton hydroquinone-quinone oxidation-reduction. Extensive mutation of this glutamate (E295) to A, V, F, H, K, and Q in purple photosynthetic Rhodobacter capsulatus results in hydroquinone oxidation rates that are between 5 and 50-fold slower than that in the wild type. However, the mutants show little or no detectable effects on hydroquinone or quinone exchange and binding at the Q(o) site nor on subsequent Q(o) site-mediated redox equilibria in the c-chain and b-chain from pH 5-10. Lack of effects of mutations on the E(m)/pH plots rules out involvement of E295 in the strong electron-proton coupling evident in either the FeS center or heme b(L). These detailed equilibrium and kinetic analyses demonstrate that E295 is not irreplaceable in the Q(o) site catalytic mechanism. Rather, E295 and several other Q(o) site residues that can also be widely varied and still support hydroquinone oxidation illustrate the considerable resilience of Q(o) site activity to mutational change in Q(o) site environs. Residues and water molecules appear to cooperate in providing a physical and chemical environment supporting hydroquinone oxidation rates comparable to those seen in nonprotein aqueous environments at electrodes. We suggest that residues at the Q(o) site (and, possibly, other respiratory and photosynthetic quinone and oxygen binding sites) are a product of natural selection primarily acting not to lower catalytic barriers according to the traditional view of enzymatic catalysis but rather to develop specificity by raising barriers in defense of semiquinone loss or energy wasting short-circuit reactions.

Fe(3+)-eta(2)-peroxo species in superoxide reductase from Treponema pallidum. Comparison with Desulfoarculus baarsii.

Superoxide reductases (SORs) are superoxide (O2-)-detoxifying enzymes that catalyse the reduction of O2- into hydrogen peroxide. Three different classes of SOR have been reported on the basis of the presence or not of an additional N-terminal domain. They all share a similar active site, with an unusual non-heme Fe atom coordinated by four equatorial histidines and one axial cysteine residues. Crucial catalytic reaction intermediates of SOR are purported to be Fe(3+)-(hydro)peroxo species. Using resonance Raman spectroscopy, we compared the vibrational properties of the Fe3+ active site of two different classes of SOR, from Desulfoarculus baarsii and Treponema pallidum, along with their ferrocyanide and their peroxo complexes. In both species, rapid treatment with H2O2 results in the stabilization of a side-on high spin Fe(3+)-(eta(2)-OO) peroxo species. Comparison of these two peroxo species reveals significant differences in vibrational frequencies and bond strengths of the Fe-O2 (weaker) and O-O (stronger) bonds for the T. pallidum enzyme. Thus, the two peroxo adducts in these two SORs have different stabilities which are also seen to be correlated with differences in the Fe-S coordination strengths as gauged by the Fe-S vibrational frequencies. This was interpreted from structural variations in the two active sites, resulting in differences in the electron donating properties of the trans cysteine ligand. Our results suggest that the structural differences observed in the active site of different classes of SORs should be a determining factor for the rate of release of the iron-peroxo intermediate during enzymatic turnover.

Fe3+-hydroxide ligation in the superoxide reductase from Desulfoarculus baarsii is associated with pH dependent spectral changes.

Superoxide reductase (SOR) catalyzes the reduction of O2*- to H2O2. Its active site consists of a non-heme Fe2+ center in an unusual square-pyramidal [His4 Cys] coordination. Like many SORs, the electronic absorption band corresponding to the oxidized active site of the SOR from Desulfoarculus baarsii exhibits a pH-dependent alkaline transition changing from ca. 644 to 560 nm as the pH increases and with an apparent pKa of 9.0. Variants in which the conserved amino acids glutamate 47 and lysine 48 were replaced by the neutral residues alanine (E47A) and isoleucine (K48I), respectively, exhibited the same alkaline transition but at lower apparent pKa values of 6.7 and 7.6, respectively. Previous work [Nivière, V.; Asso, M.; Weill, C. O.; Lombard, M.; Guigliarelli, B.; Favaudon, V.; Houée-Levin, C. Biochemistry 2004, 43, 808-818] has shown that this alkaline transition is associated with the protonation/deprotonation of an unidentified base, B-, which is neither E47 nor K48. In this work, we show by resonance Raman spectroscopy that at basic pH a high-spin Fe3+-OH species is formed at the active site. The presence of the HO- ligand was directly associated with an absorption band maximum at 560 nm, whereas upon protonation, the band shifts to 644 nm. With respect to our previous work, B- can be identified with this high-spin Fe3+-OH species, which upon protonation results in a water molecule at the active site. Implications for the SOR catalytic cycle are proposed.

Mössbauer characterization of an unusual high-spin side-on peroxo-Fe3+ species in the active site of superoxide reductase from Desulfoarculus Baarsii. Density functional calculations on related models.

Superoxide reductase (SOR) is an Fe protein that catalyzes the reduction of superoxide to give H(2)O(2). Recently, the mutation of the Glu47 residue into alanine (E47A) in the active site of SOR from Desulfoarculus baarsii has allowed the stabilization of an iron-peroxo species when quickly reacted with H(2)O(2) [Mathé et al. (2002) J. Am. Chem. Soc. 124, 4966-4967]. To further investigate this non-heme peroxo-iron species, we have carried out a Mössbauer study of the (57)Fe-enriched E47A SOR from D. baarsii reacted quickly with H(2)O(2). Considering the Mössbauer data, we conclude, in conjunction with the other spectroscopic data available and with the results of density functional calculations on related models, that this species corresponds to a high-spin side-on peroxo-Fe(3+) complex. This is one of the first examples of such a species in a biological system for which Mössbauer parameters are now available: delta(/Fe) = 0.54 (1) mm/s, DeltaE(Q) = -0.80 (5) mm/s, and the asymmetry parameter eta = 0.60 (5) mm/s. The Mössbauer and spin Hamiltonian parameters have been evaluated on a model from the side-on peroxo complex (model 2) issued from the oxidized iron center in SOR from Pyrococcus furiosus, for which structural data are available in the literature [Yeh et al. (2000) Biochemistry 39, 2499-2508]. For comparison, similar calculations have been carried out on a model derived from 2 (model 3), where the [CH(3)-S](1)(-) group has been replaced by the neutral [NH(3)](0) group [Neese and Solomon (1998) J. Am. Chem. Soc. 120, 12829-12848]. Both models 2 and 3 contain a formally high-spin Fe(3+) ion (i.e., with empty minority spin orbitals). We found, however, a significant fraction ( approximately 0.6 for 2, approximately 0.8 for 3) of spin (equivalently charge) spread over two occupied (minority spin) orbitals. The quadrupole splitting value for 2 is found to be negative and matches quite well the experimental value. The computed quadrupole tensors are rhombic in the case of 2 and axial in the case of 3. This difference originates directly from the presence of the thiolate ligand in 2. A correlation between experimental isomer shifts for Fe(3+) mononuclear complexes with computed electron densities at the iron nucleus has been built and used to evaluate the isomer shift values for 2 and 3 (0.56 and 0.63 mm/s, respectively). A significant increase of isomer shift value is found upon going from a methylthiolate to a nitrogen ligand for the Fe(3+) ion, consistent with covalency effects due to the presence of the axial thiolate ligand. Considering that the isomer shift value for 3 is likely to be in the 0.61-0.65 mm/s range [Horner et al. (2002) Eur. J. Inorg. Chem., 3278-3283], the isomer shift value for a high-spin eta(2)-O(2) Fe(3+) complex with an axial thiolate group can be estimated to be in the 0.54-0.58 mm/s range. The occurrence of a side-on peroxo intermediate in SOR is discussed in relation to the recent data published for a side-on peroxo-Fe(3+) species in another biological system [Karlsson et al. (2003) Science 299, 1039-1042].

Identification of iron(III) peroxo species in the active site of the superoxide reductase SOR from Desulfoarculus baarsii.

The active site of superoxide reductase SOR consists of an Fe2+ center in an unusual [His4 Cys1] square-pyramidal geometry. It specifically reduces superoxide to produce H2O2. Here, we have reacted the SOR from Desulfoarculus baarsii directly with H2O2. We have found that its active site can transiently stabilize an Fe3+-peroxo species that we have spectroscopically characterized by resonance Raman. The mutation of the strictly conserved Glu47 into alanine results in a stabilization of this Fe3+-peroxo species, when compared to the wild-type form. These data support the hypothesis that the reaction of SOR proceeds through such a Fe3+-peroxo intermediate. This also suggests that Glu47 might serve to help H2O2 release during the reaction with superoxide.